ZWO Cooled Camera Anti-Dew Heater Strip for Pro Cameras - ZWO-Anti-Dew

ZWOSKU: ZWO-Anti-Dew

Price:
Sale price$26 CAD
Stock:
In stock: 6 unit(s) - Most orders placed by 2PM EST will be shipped out the same day (weekdays)

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Dave P
ZWO camera dew heater

Easy to install (carefully). Cabling is a bit too long. Makes for messy cable management with the included Y connector Cable. Tested with probe, it increases the ambient temperature above it by 4⁰C. Of course it's been cloudy since purchase date, so we'll see how it performs.

Description

The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras.

This  kit includes the zip-tie, anti-dew heater strip and an Y power cord:

Anti-dew-Kit-NEW

The thickness of the anti-dew heater strip is 0.2~0.3mm.

The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.

And we recommend a DC adapter giving 12V at 0.35 A  resulting in a heating power on the strip that is around 4.2 watts. You can use one and same power cord to power both the fan and heater simultaneously, but make sure not to exceed recommended amount of Ampere.

 

NOTE: for many ASI-cameras a heater strip is not necessary since they have one that is build into the cameras itself.

ASI071MC-P/ASI6200/ASI2600/ASI2400 cameras come with anti-dew heater that will heat the protective glass to avoid any dew problems.

For ASI183/ASI1600/ASI294/ASI533 cameras, the heat emitting from the TEC will be conducted to the camera case and avoid any dew problems when TEC cooling system working.

 

How to use it?

  1. Tear out the protective film on adhesive tape
Anti-dew-theback0
2. Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end)

Anti-dew-step2

Anti-dew-step2.2

3. Tie the black cable with a zip-tie on the camera body.Anti-dew-step4

4. Plug in the power cord, then everything is done.

Anti-dew-step5

Anti-dew-step6.1

 

Now you should be dew-free while shooting with the camera.

NOTICE: Be careful about welding portion, it is vulnerable can not holding very strong pull.

Additional Resources

You may also like

Recently viewed